Re: [mk1][cold start valve][help]

["A. Bjorkheim" <andreb@u.washington.edu>]

> I'm pretty darn sure that you could make this test a lot simpler by just
> running 12v to the cold start valve and seeing if it sprays fuel while you jump
> the fuel pump relay.

    Yup, that is my next step.  I think the Bentley I have is screwed up.
It tells me to jumper the thermo plug when testing the cold start valve
but in another section it says that if you put a meter or a lamp on the
plug of the cold start valve when the engine is cold, it should light up.
Well, sounds contradictory to me to have a jumper on the thermo plug and
get 12v at each terminal, thereby turning it totally off.  That is, when
you are doing the tests.  Anyways, Brian Hannold pointed out the little
mistake to me so now I know to avoid that section of the Bentely.  U still
follow me?

  Andre'
  Neon Green 79

- --
To subscribe or unsubscribe, send email to scirocco-L-request@scirocco.org,
with your request (subscribe, unsubscribe) in the BODY of the message.

------------------------------