Re: Fuel Enrichment Device

[Etrik <etrik@pure-research.net>]

Brett VanSprewenburg wrote:
> Bing! Bing! Bing!
> 
> Right on the ball mister, again.  This is exactly what I'm going to do.  I can
> even tell you the range you'll probably need, if I remember correctly it was
> from 1k-6k ohms.  Somewhere in that range will produce the correct mA current
> to flow to the control pressure regulator, which is as you know 20.5 mA (the
> BEST piece of info from the EC article), which should induce the correct fuel
> to air ratio.  You also correctly deduced that the correct ratio is not 14.7:1,
> it's slightly below, 13:1 is probably right on the money.

Yes, that piece of info is the only thing usefull I have ever gotten
from
EC.  The thing that sucks is my multi-meter is blown  :(, I'll have to
pick one up.

> 
> >
> > I may just have to take a ride to the local electroincs supply (I can
> > get one of those nifty cases a radio shack) and try this out.
> 
> You'll have to push me out of the way at the parts counter!  :-)

I was gonna go, but it started to rain/ice, DAMNIT.

> 
> >
> > Etrik
> 
> If I can find 1 pot, I'll get a couple and try and cover the range that way.
> Have you looked at the resistance vs temperature graphs in the Bentley?
> 

Hehe, bently.....yea...umm......I'll get one sometime this century :).


TTYL
Etrik
--
To subscribe or unsubscribe, send email to scirocco-L-request@privateI.com,
with your request (subscribe, unsubscribe) in the BODY of the message.