RE>Euro lights

[Kathy Teulie <104372.1061@compuserve.com>]

Cool I like the big lights. This was my first mod on my 16v.
Do not cut the plastic. Do not use the lower screws, I had this setup for 2
years
and it worked fine. You should move the lower screw boss (plastic parts) to
the Euro setting.
You will need to crank the lamps down to the lower range. You will need to
remove the High
Beem connectors housing and the city lights can be connected to the parking
lights. If you 
can change the turnsignals at the same time I would. US bumpers will make
the assembly a bit more
fun then with Euro bumpers. Try not to scratch the paint on the bumper.
They will look great!!!!!!!!!!

Doug
87 16v silver Scirocco GTX
Now with Euro Bumpers 
O.C. CA USA.

Message text written by Brett VanSprewenburg
>I just got a set up European lights for my 16v.  They really are going to
>look nice on the car.  I have a question for anyone who's done this
>conversion.  Did you have to remove any plastic bumper cover material from
>under the lights to get them to sit low enough?  I can't see how to get
>the attaching screws to line up without doing this.  I'd hate to cut a
>slot for the holder only to find out there was a better way.  Any info
>would be appreciated.  Thanks!

==Brett<

--
To subscribe or unsubscribe, send email to scirocco-L-request@privateI.com,
with your request (subscribe, unsubscribe) in the BODY of the message.