size of speedo cable hold-down bolt

[koabi.brooks at gmail.com (Koabi Brooks)]

m7 is impossible to find at local hardware stores at least.  I think the
shield between the engine and tranny has some m7s too.  Why can't they just
use 6 or 8...

On 9/20/07, Dan Bubb <jdbubb@xxxxxxxxxxx> wrote:
>
> 7mm diameter, 1.25 thread pitch, 13mm long per ETKA.
> Funny though, in some cases I'm sure the pitch is 1.00.
>
> In either case a 7mm bolt is pretty uncommon on a Scirocco. The only other
> place they're used that I know of is to secure replacement front ball
> joints.
>
> From: "Koabi Brooks" <koabi.brooks@xxxxxxxxx>
> To: "Scirocco List" <scirocco-l@xxxxxxxxxxxx>
> Sent: Thursday, September 20, 2007 11:22 AM
> Subject: size of speedo cable hold-down bolt
>
>
> > Can I get the size of the speedo cable hold-down bolt please?  Either
> what I
> > have is the wrong size or the threads are stripped out.
> >
> > once I get that done I just have the balljoint to knuckle bolts to
> squeeze
> > in then I can step back and see what kind of damage I have done
> > _______________________________________________
> > Scirocco-l mailing list
> > Scirocco-l@xxxxxxxxxxxx
> > http://neubayern.net/mailman/listinfo/scirocco-l
> >
>
>