[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Looking for a source of alternator parts



Most larger towns have a bearing supply.  Odds are you can take the old 
bearings in and get replacements.
Worth a try.

I used to buy alternator rebuilding kits for GM alternators containing new 
bearings, brushes and voltage regulators.  Like $12.   Haven't seen them in 
years, but an alternator is pretty generic, actually.  Might be worth a call 
to NAPA....
Good luck.

larry
sandiego16v


----- Original Message ----- 
From: "John C. Worden" <johncworden@xxxxxxxxxxx>
To: <scirocco-l@xxxxxxxxxxxx>
Sent: Thursday, September 06, 2007 2:41 PM
Subject: Looking for a source of alternator parts


> The local rebuilder couldn't rebuild the alternator for the '88.  A 
> bearing is bad and he
> said it damaged the case.  Ok.  Well I happened to be looking at it the 
> other day(checking
> it against one on ebay) and noticed all of the screws look like they have 
> never been off.
> So I take it apart and he never even took it apart and the case is fine. 
> So if I can get new
> bearings I will replace them, otherwise I will just buy a rebuilt.  The 
> alternator in question
> is a 90a Bosch.
>
>
>
> John C. Worden
> Bucksport, Maine
>
> ''98 Dakota 4x4-
> '88 Scirocco 16V-
> '86 Scirocco 8V-Now a 16V!
> '78 Scirocco Brazil Brown Metallic, 4 speed.- In the Rotisserie and under 
> restoration
> '89 Polaris Indy Deluxe
>
>
>
> -- 
> Internal Virus Database is out-of-date.
> Checked by AVG Free Edition.
> Version: 7.5.446 / Virus Database: 269.5.5/769 - Release Date: 4/19/07 
> 5:56 PM
>
>
>
> _______________________________________________
> Scirocco-l mailing list
> Scirocco-l@xxxxxxxxxxxx
> http://neubayern.net/mailman/listinfo/scirocco-l
>