Speakers

[roccit_53 at scirocco.cs.uoguelph.ca (C Boyko)]

I've got a set made by Kaption that fit my 16V just fine. I can dig up more
info if you want me to...I'd rather not talk about the $100 "system" in my
8V, but with a 4K and a noisy exhaust, it really doesn't matter anyway.
Cathy

On 10:17 pm 10/02/07 Jean-Claude D?sinor  <desinor@xxxxxxxxxxxx> wrote:
>   The rears are also 4 x 6.
>   Eons ago, I bought inexpensive "Pyramid" brand speakers. Not hi-fi,
> but they cover the drone of the engine.
>
> http://www.pyramidcaraudio.com/index.asp
>
>   I got the 468G model. Even though they have a tweeter, they fit in
> the front doors. For the rears though, I had to use the plate that
> came with the speakers.
>
> http://www.pyramidcaraudio.com/itempage.asp?model=468G
>
> http://www.pyramidcaraudio.com/index.asp
>
>     Jean-Claude
>     84 8v
>
> Geordy Rostad a ?crit :
> >  How about the rears?
> >
> >  ----- Original Message ----- From: "Jean-Claude D?sinor"
> >  <desinor@xxxxxxxxxxxx>
> >  To: "Lance LaPrarie" <sciroccojunky@xxxxxxxxx>
> >  Cc: "Geordy Rostad" <geordy@xxxxxxxxxxx>; "list"
> >  <Scirocco-l@xxxxxxxxxxxx>
> >  Sent: Tuesday, October 02, 2007 5:13 PM
> >  Subject: Re: Speakers
> >
> >
> >>   The actual size is 4 x 6.
> >>   It is possible to find some that will fit even with a tweeter,
> >>  but they are rare and few between.
> >>   Good luck!
> >>
> >>     Jean-Claude
> >>     84 8v
> >>
> >>  Lance LaPrarie a ?crit :
> >>>  Hey Geordy,
> >>>
> >>>  they are 2x4 speakers. I have bostons in my doors and in the
> >>>  back shelfs.
> >>>  Polk audio makes some, Boston, and maybe Alpine. However, the
> >>>  speakers are
> >>>  two way with the tweeter in the middle. You'll need to dremmel
> >>>  out the ribs
> >>>  on the inside of the front grille's. That way they will seat
> >>>  properly. You
> >>>  won't notice any difference outside looking in. Just be super
> >>>  careful. Those
> >>>  are pretty much the only game in town as far as speakers go for
> >>>  stock locations. The rear shelf speakers are the only size that
> >>>  will fit. you can't cut anything since the bulkhead gets in the
> >>>  way and is a stress member
> >>>  so no cutting. You can pull the door pockets off of your doors
> >>>  and make some
> >>>  custom pods but that would take recovering your entire door
> >>> panel.
> >>>  Others may have a different opinion so.........
> >>>
> >>>  My two cents.
> >>>
> >>>
> >>>  On 10/2/07, Geordy Rostad <geordy@xxxxxxxxxxx> wrote:
> >>>
> >>>>  Does anyone know the size/depth of speakers that will fit in
> >>>>  the stock locations on my 16v with no cutting, , no spacers,
> >>>>  keeping the stock grill
> >>>>  in place and allows the windows to open properly.  Need to know
> >>>>  the size in
> >>>>  the rear too.  I could go out there and measure it I suppose
> >>>>  but it's raining :-(
> >>>>
> >>>>  --
> >>>>  Geordy
> >>>>
> >>
> >
>
>
> _______________________________________________
> Scirocco-l mailing list
> Scirocco-l@xxxxxxxxxxxx
> http://neubayern.net/mailman/listinfo/scirocco-l