CIS to Digifant 2 conversion

[mk1mark at gmail.com (Mark F.)]

On Nov 25, 2007 9:42 AM, Timbo <timjmcconnell@xxxxxxxxx> wrote:

> The brackets for the digifant fuel rail bolt right on to the JH head.
> You have to remove the plastic vaccum fitting on one side to bolt the
> bracket down.  If you sealed the cups properly - you can just leave
> this thing open.


I filled the hole under the plastic fitting with two-part epoxy.
Sealing at the injectors no longer mattered...

Later,

Mark.
75
82
82 Caddy - mTDI swap in progress
91 Jetta Coupe