Anybody ever test their heater blower motor?

[roccit_53 at scirocco.cs.uoguelph.ca (C Boyko)]

On 2:02 pm 05/19/07 "David Brown" <sharpshooter33@xxxxxxxxxxxxxx> wrote:
> Anybody ever pull the connector that goes to the heater blower motor
> and hit it with some test voltage to see if it runs?
>
> If so which wires/connections do you run voltage thru?
>
> I'm going to try it with mine to make sure it's the blower motor
> before I dig into it.  I just pulled the one out of my parts car and it
> was a pain in the a$$ even with the dash and everything but the heater
> core out.  But atleast I know where all the hidden little bolts are
> now. 8-)
>
> David
>

Seems to me there's a resistance test for it in the Bentley and that the
connectors are under the plastic cover in the raintray. Mind you, this was
the MkI. And the switch is easy enough to test. In my case, it was a faulty
load reduction relay.
Cathy
______________________________________________
> Scirocco-l mailing list
> Scirocco-l@xxxxxxxxxxxx
> http://neubayern.net/mailman/listinfo/scirocco-l