lower stress bar

[jlagnese at massed.net (John S. Lagnese)]

I always thought that for the minute it took...
  ----- Original Message ----- 
  From: Koabi Brooks 
  To: John S. Lagnese 
  Cc: julie@xxxxxxxxxxxxxxxxxx ; Chris Bennett ; Scirocco List 
  Sent: Monday, June 25, 2007 2:42 PM
  Subject: Re: lower stress bar


  i just did this yesterday and they will become a bit off if you dont do that.  ask me how i know ;)


  On 6/25/07, John S. Lagnese < jlagnese@xxxxxxxxxx> wrote:
    I thread the 19 mm bolts back in to make sure things remain aligned. 
    John
    ----- Original Message -----
    From: <julie@xxxxxxxxxxxxxxxxxx>
    To: "Chris Bennett" <scirocco16vr32@xxxxxxxxx >; "Scirocco List"
    <scirocco-l@xxxxxxxxxxxx>
    Sent: Sunday, June 24, 2007 4:46 PM
    Subject: Re: lower stress bar


    > 19mm for the 2 main bolts and 13's for the smaller. So Yup, it has to come 
    > out.
    >
    >>-----Original Message-----
    >>From: Chris Bennett [mailto:scirocco16vr32@xxxxxxxxx]
    >>Sent: Sunday, June 24, 2007 04:16 PM
    >>To: 'Scirocco List'
    >>Subject: lower stress bar
    >>
    >>Bentley doesn't say it but the lower stress bar has to come out for the
    >>tranny?
    >>
    >>--
    >>80 Scirocco Callaway Indiana Red 
    >>87 Scirocco 16v Tornado Red
    >>04 R32 Reflex Silver
    >>_______________________________________________
    >>Scirocco-l mailing list
    >>Scirocco-l@xxxxxxxxxxxx 
    >>http://neubayern.net/mailman/listinfo/scirocco-l
    >>
    > _______________________________________________
    > Scirocco-l mailing list 
    > Scirocco-l@xxxxxxxxxxxx
    > http://neubayern.net/mailman/listinfo/scirocco-l
    >

    _______________________________________________ 
    Scirocco-l mailing list
    Scirocco-l@xxxxxxxxxxxx
    http://neubayern.net/mailman/listinfo/scirocco-l