more parts needed

[sharpshooter33 at roadrunner.com (David Brown)]

I've been hit with ricochet jackets from a 223 projectiles they sting a bit. 
I have some nice WWII 3006 AP bullets if you decide to give it a crack. 8-) 
They will cut 1", but not 2" (tired it) steel plating

BEER
David
8-)


----- Original Message ----- 
From: "Chris Bennett" <scirocco16vr32@xxxxxxxxx>
To: "Mtl-Marc" <marc_scirocco@xxxxxxxxxxxx>
Cc: "Scirocco List" <scirocco-l@xxxxxxxxxxxx>
Sent: Saturday, June 23, 2007 8:44 PM
Subject: Re: more parts needed


> Well the problem at hand is that the AR-15 fires a .223 copper jacketed
> bullet at fairly high velocities.
>
> I think unless I grazed a piston the bullet would go right through the
> radiator block and possibly the firewall.
>
> Then there's always ricochet.  Being that I am less than a mile from a 
> major
> highway that probably wouldn't be a good idea.  Not that I am against 
> holes
> in my scirocco at this point I just can't guarentee where the bullets go.
>
> As I said I have a starter and a bolt. (Actually it's the upper one so 
> that
> may be an issue.)
>
> I am going to take a few minutes then get back at it.
>
>
>
>
> On 6/23/07, Mtl-Marc <marc_scirocco@xxxxxxxxxxxx> wrote:
>>
>> Emailing yourself, and breaking your own car. We can clearly see a 
>> pattern
>> here, and not sure it can be cured.
>>
>> If you do decide to go the AR-25 route, please let us know the outcome,
>> and
>> perhaps get us a few pics!
>>
>> Cheers.
>>
>> Marc
>>
>>
>> >
>> > Ok... so I seem to be primarily emailing myself here... :)
>> >
>> > I found a starter at a yard nearby it's smaller diameter
>> > possibly a2?  Also scored a bolt but no nut.  I may not be
>> > finished before I have to pack up for next week so the nut
>> > may be something I can wait on.
>> >
>> > So the clusterfrack continues.  I now have to figure out how
>> > to get that nut loose on the starter stud.
>> >
>> > I need a beer.  Self administered anaesthesia seems to be the
>> > answer here.
>> >
>> >
>> >
>> >
>> >
>> > On 6/23/07, Chris Bennett <scirocco16vr32@xxxxxxxxx> wrote:
>> > >
>> > > http://picasaweb.google.com/Scirocco16vR32/FIngStarter
>> > >
>> > > Anyone want to buy this friggin thing before I decide to
>> > shoot it with
>> > > my AR-15?
>> > >
>> > >
>> > >  On 6/23/07, Chris Bennett <scirocco16vr32@xxxxxxxxx> wrote:
>> > > >
>> > > > oh it gets better...
>> > > >
>> > > > I went to take the power lugs off the starter... and the
>> > entire LUG
>> > > > broke off.  WHAT THE HELL IS THAT ABOUT?  Anyone else seen this?
>> > > >
>> > > > I'll take pictures.
>> > > >
>> > > > Chris
>> > > >
>> > > >
>> > > >  On 6/23/07, Chris Bennett <scirocco16vr32@xxxxxxxxx > wrote:
>> > > > >
>> > > > > The last person that put starter bolts in this piece of
>> > shit cross
>> > > > > threaded them so I need at least the lower starter bolt and the
>> > > > > associated nut.
>> > > > >
>> > > > > I had a couple a while back don't know where they went.
>> > > > >
>> > > > >
>> > > > > grrrr
>> > > > >
>> > > > > Chris
>> > > > >
>>
>>
>
>
> -- 
> 80 Scirocco Callaway Indiana Red
> 87 Scirocco 16v Tornado Red
> 04 R32 Reflex Silver
> _______________________________________________
> Scirocco-l mailing list
> Scirocco-l@xxxxxxxxxxxx
> http://neubayern.net/mailman/listinfo/scirocco-l
>
>
> -- 
> No virus found in this incoming message.
> Checked by AVG Free Edition. Version: 7.5.472 / Virus Database: 
> 269.9.6/863 - Release Date: 6/23/2007 11:08 AM
>
>