Hatch Removal - wires disconnect

[amalventano1 at tds.net (Allyn)]

> I now see that the wires are soldered to the rear wiper 
> motor; it looks like a cut-and-splice near driver side hatch 
> hinge is the way to go, yes?

There *should* be a plug inside that c-pilar.  There is also a plug about 6" from centerline, towards the driver side, inside the
bottom rail of the hatch (behind the badge).  It's wrapped inside some foam to prevent rattles.  The only way to get to it properly
is to give it slack from the top wire of the hatch (at the boot).

Al