[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

low oil pressure?



You can pre-lube the engine with the timing belt off of the intermediate 
gear, and run it until it's pressurized.

I have a special tool, that my friend Dan aka BFDEIHL made for me, it uses a 
2L 16V oil pump drive gear, and he welded a 13mm hex-nut onto it.
You remove the o'le distributor clamp, that holds the round puck, that 
covers the oil pump drive. Lift them both out of the way, you pull the oil 
drive gear out with a strong magnet, and put the modified oil pump drive 
gear on, and run it with a drill. You don't have to touch the timing belt 
with this type of pre-lube tool.

I'm not preachin' or braggin' about my tool, I'm just giving you the info 
you need to make your own pre-lube tool.

Peter - 302.832.8989
http://thescirocco.com
----- Original Message ----- 
From: "Don Walter" <dswalterwi@gmail.com>
To: "John S. Lagnese" <jlagnese@massed.net>; <sciroccojunky@gmail.com>
Cc: "Scirocco List" <scirocco-l@scirocco.org>
Sent: Friday, February 16, 2007 3:21 PM
Subject: Re: low oil pressure?


> The engine was just put in.  It has been on an engine stand for about 1
> year.  The oil is fresh (new) and we have only drove it about 20 miles 
> after
> we had it running previously.   It took about 20 minutes for the lifters 
> to
> quite down when we first fired it up but that it normal as the lifters 
> have
> to pressurize themselves or what ever the heck they do.  Personnally I 
> think
> that it is just the lifters and not a pressure problem but we will verify
> that with a gauge this weekend.  We will also get some cleaner as 
> suggested
> by Dan.
>
> On 2/15/07, John S. Lagnese <jlagnese@massed.net> wrote:
>>
>> Have you been running it regularly?
>> ----- Original Message -----
>> From: "Ben Walter" <toofast4you89@gmail.com>
>> To: "Scirocco List" <scirocco-l@scirocco.org>
>> Sent: Wednesday, February 14, 2007 9:37 PM
>> Subject: low oil pressure?
>>
>>
>> > hello everyone,
>> >
>> >  to my horror i report a constant lifter "tick" noise upon start up of
>> > car,
>> > for about 5-10 minutes.  this weekend i plan to hook up a pressure 
>> > gauge
>> > to
>> > test my fears.  any thoughts before i order a new pump?
>> > _______________________________________________
>> > Scirocco-l mailing list
>> > Scirocco-l@scirocco.org
>> > http://neubayern.net/mailman/listinfo/scirocco-l
>> >
>>
>> _______________________________________________
>> Scirocco-l mailing list
>> Scirocco-l@scirocco.org
>> http://neubayern.net/mailman/listinfo/scirocco-l
>>
>
>
>
> -- 
> Don Walter - Waukesha, WI
> 1986 8V Black Scirocco (Daily Driver)
> 1984 8V Audi 4000s (RIP 2/14/2006)
> 1986 2.0L 16V TEC 2 Black Scirocco (see progress at
> http://www.cardomain.com/memberpage/708939)
> 1986 2L 16V Toronado Red Scirocco (Ben's Car)
> 1988 1.8 16V Toronado Red Scirocco (sold on 3/29/04)
> 1984 1.8 8V Pewter Scirocco (sold years ago)
> 1971 Karman Ghia (sold)
> 1969 Karman Ghia (sold)
> 1969 Beetle (sold)
> _______________________________________________
> Scirocco-l mailing list
> Scirocco-l@scirocco.org
> http://neubayern.net/mailman/listinfo/scirocco-l
>