spanner wrench for strut spring nut

[hareless at gmail.com (Sean Whalen)]

A wire wheel works really well for cleaning the strut bodies, on a drill or
bench grinder.  You might want to tape off the upper portion of the threads
so they don't get clogged with paint.  You're gonna love the HDs.

On 4/24/07, Gordy Stedman <ydrogs@gmail.com> wrote:
>
> Cool wrench.  My inserts did not come with one :(  Would have come in
> handy
> since both caps have wiggled loose on their own.  Applied liberal amounts
> of
> thread lock and torqued down with pipe wrench in hopes of them not backing
> off again.
>
> On 4/24/07, DYWong <sailingfc@dslextreme.com> wrote:
> >
> > Are you talking about a wrench like this:
> > http://www.quattro123.com/Suspension200/Strut171F.JPG
> > The one on the left.
> >
> > This wrench comes with new Bilstein strut inserts.  I have one you can
> > borrow, if you can pickup the cost of mailing it?
> >
> > 120Nm is 88.5 lb-ft.
> >
> > -Dick-
> > 78 Scirocco
> > Original Owner
>
>
> --
> Gordy
> MK1 x 5
> _______________________________________________
> Scirocco-l mailing list
> Scirocco-l@scirocco.org
> http://neubayern.net/mailman/listinfo/scirocco-l
>



-- 
Sean
A-1 x 2