MK1 8V Trans oil leak - '81S

[hareless at gmail.com (Sean Whalen)]

You want the studs without shoulders, otherwise it will gush.  Just ask
Gord.

On 4/3/07, Nate Mellom <doubt@inwave.com> wrote:
>
> Ed,
> Get ahold of Mike at www.parts4vws.com and get yourself a G60 rubber
> valve cover gasket kit (NIIIIICE upgrade, includes new shouldered
> studs), and a set of output flange seals.  Chances are good your flange
> seals are leaking.
> Good luck!
> Nate
> '81
> '88
>
> Edward Effinger wrote:
> > Greetings.
> > I was following up on my 3 oil leaks while the car was sitting on stands
> for the winter and
> > determine that 2 of them were oil, possibly the valve cover.
> > Anybody have any tricks to stop them from leaking?  I've got the cork
> gasket with no sealer
> > on either side.
> >
> > The other leak appears to be trans fluid and is dripping off the
> velocity joint on the drivers
> > side at the transmission.
> >
> > We did replace the clutch last year and all the seals, and I suspect it
> has been leaking since then.
> >
> > Any thought on what I may have missed or should look for?
> >
> > Cheers
> > Ed '81S
> > _______________________________________________
> > Scirocco-l mailing list
> > Scirocco-l@scirocco.org
> > http://neubayern.net/mailman/listinfo/scirocco-l
> >
> >
> >
>
> _______________________________________________
> Scirocco-l mailing list
> Scirocco-l@scirocco.org
> http://neubayern.net/mailman/listinfo/scirocco-l
>



-- 
Sean
A-1 x 2