[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Power module location?

Subject: Power module location?
From: rfkellner at snet.net (Rick Kellner)
Date: Mon Sep 25 20:26:18 2006
In-reply-to: <146946bb0609250627t2c01b309s5711adb6a8fdad0a@mail.gmail.com>

Brian, I have a copy of the schematic and write-up for the 16V
enrichment module if you or anyone else is interested.  This one is more
than the simple relay that kicks in with the WOT switch.  With this
enrichment device you can set the RPM to start adding fuel, typically at
higher RPMs where CIS-E tends to be lean, not at all RPMs when the WOT
switch is triggered.
Finally, I am not the author or designer, just happened to have kept the
files.  
Rick.


-----Original Message-----
From: Brian McGarvey [mailto:bmcgarvey@gmail.com] 
Sent: Monday, September 25, 2006 9:28 AM
To: Scirocco list
Subject: DIY: Power module location?

Looking for a link for DIY power module for CIS-lambda

Thanks
Bigmac..
plotting to make CIS programmable.

_______________________________________________
Scirocco-l mailing list
Scirocco-l@scirocco.org
http://neubayern.net/mailman/listinfo/scirocco-l

Follow-Ups:
- Power module location?
  - From: jlagnese at massed.net (John S. Lagnese)

References:
- DIY: Power module location?
  - From: bmcgarvey at gmail.com (Brian McGarvey)

Prev by Date: Callaway
Next by Date: Acid Bath
Previous by thread: DIY: Power module location?
Next by thread: Power module location?
Index(es):
- Date
- Thread