2 Q's

[amalventano1 at tds.net (Allyn)]

> 1) The belts on the 85 squeel a lot. I have changed them, 
> tightened them and changed them again. What should I be 
> looking for that might be causing this?

A stalling bearing (too much play causes shaft to rapidly roll along the bearing surface, causing a stall effect) - lube all driven
bearings (especially alternator).

> 2) The fan on the same car is making a HOPRRIBLE noise, like 
> the bearing failed. Its constant as the switch moves from 
> setting to setting. Any idea of the cause? (duh, bad bearing) 
> but can it be repaired?

Same reason as above, and same cure.  I'd recommend synthetic grease/moly for the latter, since it is easy enough to get to the
entire bearing.

HTH
Al