[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
SPAM-LOW: Re: stripped wiper shafts and solutions?
They're not really stripped, the grooves are just filled with aluminum from
the wiper arm.
Take a small pick, or knife, and scrape each groove clean. If the wiper arm
mounting hole is still round, you should be able to re-use it. Just tighten
it really good, locktite is a good idea, and you might need a small washer
under the nut.
HTH!
Peter
http://thescirocco.com/
Drive the GTI, and save the Scirocco!
Please! Include the previous text in your reply...
-----Original Message-----
From: Phil Boeye [mailto:rocco_phil@yahoo.com]
Sent: Thursday, March 16, 2006 6:44 PM
To: Cory Langford; Scirocco List
Subject: SPAM-LOW: Re: stripped wiper shafts and solutions?
--- Cory Langford <Cory_Langford@bcit.ca> wrote:
> I am sure you have looked carefully, but just incase. Check to see if
> they are actually stripped.
Yah, stripped. I know what you are talking about. In fact, both nuts were
loose. But the shards of metal and after taking them off and see neither
wiper or stud with knurling tells me, 'stripped'!
__________________________________________________
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam protection around
http://mail.yahoo.com
_______________________________________________
Scirocco-l mailing list
Scirocco-l@scirocco.org
http://neubayern.net/mailman/listinfo/scirocco-l