[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

ETKA request from Julie



julie@menloparkrandd.com wrote:
> What are the bolts used to hold the pull on the crank of a 16v?
> All I know is that they are 6mm allen keys
>
>   

The bolts that hold the pulley/harmonic balancer to the timing gear are 
M8X37, there are four of them.  The bolt that holds the timing gear to 
the crank is M14X1.5X33, and there's one (very important) of them... :)

Drew