[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
ETKA Part numbers needed
On the upper cover, N 044 703 3, or M6x45 with washer: N 012 226 5
(B6x12x0.5)
The lower cover has a stud, 049 109 166 with a nut and washer:
N 011 006 24 for the nut (a standard M6) and the same washer above.
On the bottom of the lower cover, allen head bolt: N 014 705 3 (M6x25)
with the N 012 washer. Also, there is the funny "T-head" screw, which
is:
N 900 534 01 with the nut and washer from above. Finally, the metal
backing plate behind the timing cover has a M6x12 bolt, N 010 212 26, with
the same washer like everything else. Hope that helped. By the way, the
8v cover has a lot of the same components, so if you have one lying
around....
Brendan
P.S. I worked in VW parts for two years, and I have in my possession a
full US and EURO spec ETKA system for VW and AUDI plus industrial engine
components. Just an FYI. ;)
--- Derrick floyd <tyrone27@gmail.com> wrote:
> Need the part numbers or bolt sizes for the lower and upper timing belt
> covers mounting hardware. I'm rebuilding a 2.0 16v motor after a blow
> up
> _______________________________________________
> Scirocco-l mailing list
> Scirocco-l@scirocco.org
> http://neubayern.net/mailman/listinfo/scirocco-l
>
__________________________________________________
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam protection around
http://mail.yahoo.com