[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Oil pressure switch
Is this the famous "Cincy or Bust" Karl?
There are 2 sensors. Higher and Lower pressure mounted on the oil filter flange. The temp is on the back of a 16v motor.
Check the connectors on the switches. Its only tinned copper and it dows corrode. Check where the wire exits the plastic and connects to the connector.
Have fun!
>-----Original Message-----
>From: silvius14@comcast.net [mailto:silvius14@comcast.net]
>Sent: Thursday, June 8, 2006 08:44 PM
>To: scirocco-l@scirocco.org
>Subject: Oil pressure switch
>
>When I look in my engine compartment at the oil filter, which is the oil pressure switch. I see what looks like a sensor directly above the filter and one between it and the engine. The problem that I'm having is the oil warning light coming on. The oil level is fine and looks fairly clean on the dip stick.
>
>Any suggestions?
>
>Thanks,
>Karl
>_______________________________________________
>Scirocco-l mailing list
>Scirocco-l@scirocco.org
>http://neubayern.net/mailman/listinfo/scirocco-l
>