[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Old style Dual Vac distrib. question
I have a photo of the under-hood sticker from my '81 I removed before I painted
it. If you can wait until tonight, I can forward it to you.
LMK - JT
> In an attempt to get the '79 to run just perfect I was going through the
> vac. hoses again. No leaks but I did find something interesting. One of
> the hoses was completely flat. Looks like it has collapsed and was
> basically blocked.
>
> It was the hose on the back of the distrib. can (vac. retard I believe it
> is). So I replaced it with a nice new German one :)
>
> I just wanted to check to make sure the vac. hose routing is correct.
>
> Right now the rear of the can (retard?) is connected to the intake
> manifold, so it gets vac when the TB butterfly closed (idle). The front
> of the can is connected to the intake tube so it gets no vac at idle, but
> I should assume it would get some vac when the TB is open (vac. advance?)
>
> I looked at the bently diagram and I think that is correct, just wanted to
> double check with someone who has one installed :)
>
> Cory Langford
> '86 Roc turbo,
> '78 Roc turbo - Daily driver project,
> '65 Ghia Coupe
> 95 Eurovan, etc, etc... :)
>
> _______________________________________________
> Scirocco-l mailing list
> Scirocco-l@scirocco.org
> http://neubayern.net/mailman/listinfo/scirocco-l