looking for parts for an 88 16V

[jlagnese at massed.net (John Lagnese)]

No, it was about the used bearing part. When the hub comes out the bearing
comes apart.
John

-----Original Message-----
From: Allyn [mailto:amalventano1@tds.net] 
Sent: Wednesday, August 09, 2006 2:15 AM
To: 'John Lagnese'; 'Jim Ruffi'; 'Matt Muscavitz'; scirocco-l@scirocco.org
Subject: RE: looking for parts for an 88 16V

> You would need the entire assembly.
> John

You talking about the bearings?  So long as the circlips are in good shape,
and there is access to a press / bearing removal tool,
only the bearing itself is needed.

Or were you responding on the rear brake part of the message?

Al