looking for parts for an 88 16V

[jlagnese at massed.net (John Lagnese)]

You would need the entire assembly.
John

-----Original Message-----
From: scirocco-l-bounces+jlagnese=massed.net@scirocco.org
[mailto:scirocco-l-bounces+jlagnese=massed.net@scirocco.org] On Behalf Of
Jim Ruffi
Sent: Tuesday, August 08, 2006 2:13 PM
To: Matt Muscavitz; scirocco-l@scirocco.org
Subject: RE: looking for parts for an 88 16V

There's really no such thing as used front wheel bearings for an A1.  You'll
need new ones.
http://www.parts4vws.com/catalog/product_detail.asp?PartNumber=171407625D
http://www.parts4vws.com/catalog/product_detail.asp?PartNumber=171498625D

Probably a good idea to get 1 bearing and 1 bearing kit, so you have some
extra hardware in case you need it.

>-----Original Message-----
>From: scirocco-l-bounces+sciroccos=earthlink.net@scirocco.org
>[mailto:scirocco-l-bounces+sciroccos=earthlink.net@scirocco.org]On
>Behalf Of Matt Muscavitz
>Sent: Tuesday, August 08, 2006 1:28 PM
>To: scirocco-l@scirocco.org
>Subject: looking for parts for an 88 16V
>
>
>if anyone has any  rear break parts (used in good condition) and a
>pair of front wheel bearings, for an 88, i need some. i heard
>about the pipe line and my 91 Suburban is coming off the road and
>the rocco is going back on the road. it might need hi -test to
>run, but at 25 miles to the gallon to 12 to 14...... on low grade
>fuel..... you get the hint.....
>
>Thanx guys!
>
>Matt musky
>


_______________________________________________
Scirocco-l mailing list
Scirocco-l@scirocco.org
http://neubayern.net/mailman/listinfo/scirocco-l