Shine rear swaybar dimension & metallurgical advice needed + (ATTN: Ron P.)

[amalventano1 at tds.net (Allyn)]

IIRC, it was either 2" or 2.5" 'u' channel.
Al

> -----Original Message-----
> From: Mark F. [mailto:mk1mark@gmail.com] 
> Sent: Friday, August 04, 2006 7:59 PM
> To: Allyn
> Cc: Rick Kellner; scirocco list
> Subject: Re: Shine rear swaybar dimension & metallurgical 
> advice needed + (ATTN: Ron P.)
> 
> On 8/4/06, Allyn <amalventano1@tds.net> wrote:
> > Ron used a 'different' piece of steel for that task.
> > I don't think its on rons site.  I dug around the files 
> locally (his site is on this system), and came up nill.
> 
> 
> I found one of Ron's posts on the subject in the archives, 
> but the link to the pic no longer exists.  IIRC he used a 
> piece of channel, right?  Ron, if you're around, got any 
> pics/specs?  Did you ever get to directly compare it to a 
> Shine bar on the track?
> 
> Thanks!
> 
> Mark.
> 75
> 82 - in search of stiff ass end
> 82 Caddy
> 93 Chevy/Kia 1/2 ton