Brake pedal adjustment..

[johncworden at verizon.net (John C. Worden)]

Which means it doesn't have the switch at the pedal, just on the
master cylinder.  Not sure on this one, but it seems that either
the rod from the pedal to the cylinder needs adjusting, or those
switches you put are having issues.

John

At 05:56 PM 4/25/06, Michael Bueti wrote:

>It is a Mk1 (1980)
>
>On 4/25/06, Jean-Claude Desinor <desinor@sympatico.ca> wrote:
> >   I think you want to adjust the position of the brake light *switch*,
> > not the pedal ...
> >   The switch is located somewhere around the top of the brake pedal but
> > below the hinge. (what year? MkI or Mk2 ?)
> >
> >        Jean-Claude
> >
> > Michael Bueti a ?crit :
> > > My taillights aren't engaging unless I mash the pedal, yet the brakes
> > > feel tight and work fine. Proper pressure and everything. I checked
> > > the B-manual and read about brake pedal adjustment. I'm real gun-shy
> > > about performing this adjustment cause I've never done it before. Does
> > > anyone have experience with pedal adjustment? Is there something I'm
> > > overlooking?
> >
> >
> >
>
>_______________________________________________
>Scirocco-l mailing list
>Scirocco-l@scirocco.org
>http://neubayern.net/mailman/listinfo/scirocco-l
>
>
>
>--
>No virus found in this incoming message.
>Checked by AVG Anti-Virus.
>Version: 7.1.385 / Virus Database: 268.4.6/323 - Release Date: 4/24/06




-- 
No virus found in this outgoing message.
Checked by AVG Anti-Virus.
Version: 7.1.385 / Virus Database: 268.4.6/323 - Release Date: 4/24/06