Motor Mounts - Which to use

[julie at menloparkrandd.com (julie@menloparkrandd.com)]

I have Poly's on both sides. Some days I feel like the Grinch "That feeeeellllsssss gggoooodddd...."
They are going when the engine goes back in............

>-----Original Message-----
>From: Allyn [mailto:amalventano1@tds.net]
>Sent: Monday, April 10, 2006 06:39 PM
>To: peter@thescirocco.com, ''Cory Langford'', ''Scirocco list''
>Subject: RE: Motor Mounts - Which to use
>
>> I use and recommend the TT rear race mount, aka VW 
>> Motorsport, and it works great with the front race mount, or urethane.
>
>That same part gave me excessive vibration (at idle, not even on power), and did
>so no matter what motor alignment I attempted. This was with recent side mounts
>and front poly. I completely removed the front mount bracket and still had the
>vibration, which made me go back to stock rear after a single drive around the
>block.
>
>Which reminds me, I still have that vw motorsport rear mount with <30 minutes
>use on it that I could sell off...
>
>> BTW, the rear urethane mounts self-destruct.
>
>Totally agree, way too much force to be placed on a urethane part.
>
>Hth
>Al
>
>
>
>_______________________________________________
>Scirocco-l mailing list
>Scirocco-l@scirocco.org
>http://neubayern.net/mailman/listinfo/scirocco-l
>