master brake cylinder

[sharpshooter33 at adelphia.net (David Brown)]

----- Original Message ----- 
From: "C Boyko" <roccit_53@scirocco.cs.uoguelph.ca>
To: <silvius14@comcast.net>
Cc: <scirocco-l@scirocco.org>
Sent: Friday, April 07, 2006 10:05 PM
Subject: Re: master brake cylinder


> On 11:33:45 am 04/07/06 silvius14@comcast.net wrote:
>> Does anyone have any advice on how to replace the master brake
>> cylinder?  Any suggestion on the best place to buy one?
>> Thanks,
>> Karl
>> _______________________________________________
>>
> I've bought from several places, but as for advice? I start marinating the
> possible offending threaded bits as early as possible, I use Kroil on the
> following: fittings on the lines to the MC, the nuts that hold it to the
> booster, and the bleeders, especially the bleeders (on all four wheels).

KROIL!  I thought only gun people used Kroil?

Your scaring me. 8-)