(8v) are there different sized injector o-rings (or injector cups)?

[roccit_53 at scirocco.cs.uoguelph.ca (C Boyko)]

> > In my experience striking a flathead screwdriver (nice big one -
> > resting on the lip of the injector) with a hammer is the best way ...
 Forcing them usually doesn't work for me (especially with
> > fresh o-rings), whereas the "shock and awe" technique (there it is
> > again Cathy! :D) works everytime...
>

Yeah, works for motor mounts and injectors too!. I'd used it on my
injectors in the fall before I knew the name of the method. It worked fine,
and you guys know if there's a chance to screw it up, I'll screw it up.

cathy