Engine to transmission bolt size

[timjmcconnell at gmail.com (Tim McConnell)]

That's funny - because by older 84 8v was MISSING ALL OF THOSE!!!! -
yep - that's right. Forces of god were holding it together. I was also
missing the top starter bolt. The front mount was not there. I was
wondering what that gap was.

--Timbo

On 5/30/05, Matt <matt.proc@gmail.com> wrote:
> The other day my clutch decided to stop disengaging (while I was
> driving over a bridge no less) so today I dropped the transmission and
> removed the clutch disk shrapnel. By shrapnel I mean two springs and a
> good chunk of metal. Anyway, after admiring my handiwork for a minute
> I realized I had skipped a step and never removed any bolts holding
> the engine and transmission together. Also AWOL were the screws that
> supposedly hold that thin piece of metal to the tranny (clutch
> cover?). I guess it was held on by the starter bolts and the power of
> positive thinking.
> 
> What size should my nonexistant bolts and screws be? This is in an 84 8v, btw.
> 
> _______________________________________________
> Scirocco-l mailing list
> Scirocco-l@scirocco.org
> http://neubayern.net/mailman/listinfo/scirocco-l
> 


-- 
www.vintagewatercooleds.com/tech