return of the twin cam

[scourge at cogeco.ca (Scourge)]

My poly mounts were having fun with my idle screw, I could drive about 5
blocks before the idle screw was almost falling out, lol. I've had it held
in with blue loctite since October with no problems.

-George
----- Original Message -----
From: "Mark F." <mk1mark@gmail.com>
To: "Jim Ruffi" <sciroccos@earthlink.net>
Cc: "Chris Bennett" <scirocco16vr32@gmail.com>; <scirocco-l@scirocco.org>
Sent: Friday, May 06, 2005 12:12 PM
Subject: Re: RE: return of the twin cam


On 5/6/05, Jim Ruffi <sciroccos@earthlink.net> wrote:
> I believe blue loctite is less aggressive.


There's an even less aggressive Loctite to keep bolts from vibrating
loose (Loctite 222).  This would probably work fine for idle screws.
Myself, I've used silicone with great results...

Later,

Mark.
75
80 S
90 Audi Coupe Quattro - 10vt

_______________________________________________
Scirocco-l mailing list
Scirocco-l@scirocco.org
http://neubayern.net/mailman/listinfo/scirocco-l