Re: Euro Bumper Mounting Bolts

["Doug C." <carvsdriver@msbx.net>]

Dave, you need to get new bolts.  You'll need to get some that are M12x1.75  I was able to get mine at Lowes.  If you did force the english bolts in, you may want to pick up a M12x1.75 tap to recut/clean out the threads for the new metric bolts.  HTH

-Doug
 
> -----Original Message-----
> From: David L. Winchell, II [mailto:davidwinchell2@sprynet.com]
> Sent: Saturday, March 12, 2005 09:48 AM
> To: 'Scirocco List'
> Subject: Euro Bumper Mounting Bolts
>
> I am having a little problem swapping bumpers on one of the roccs. I have
> removed the US bumper and am trying to install the Euro Bump in its place.
> I get the bolts to thread just far enough that the bolt begins to peak
> through the back side of the fixed nut on the bumper and then it stops. Are
> the bolts for the US bumpers different that the bolts for the Euro bumpers?
> Different length? Different thread pitch? Are these just rusty and need to
> be worked in?
>
> Any help would be greatly appreciated.
>
> Thanks,
> Dave
>
> David L. Winchell, II
> Winchell Appraisal Service
> (843) 762-9577 (Phone)
> (843) 406-1356 (Fax)
> DavidWinchell2@sprynet.com
>
>
> _______________________________________________
> Scirocco-l mailing list
> Scirocco-l@scirocco.org
> http://neubayern.net/mailman/listinfo/scirocco-l



_______________________________________________
Scirocco-l mailing list
Scirocco-l@scirocco.org
http://neubayern.net/mailman/listinfo/scirocco-l