sticky situation

[DMaula at gordonrees.com (Denny Maula)]

There's an adhesive specially formulated for this. Get it at the local
FLAPS. Shouldn't cost more than 3 bucks.

Clean the surfaces, break the seal, mix up the compound and glue the
metal tab on.. Then hang the mirror after the compund has COMPLETELY
cured.

I've done it a ton of times (used to work at a store)

-----Original Message-----
From: scirocco-l-bounces+dmaula=gordonrees.com@scirocco.org
[mailto:scirocco-l-bounces+dmaula=gordonrees.com@scirocco.org] On Behalf
Of Greg Pallett
Sent: Wednesday, June 15, 2005 2:05 PM
To: Scirocco list
Subject: sticky situation


It's been really hot here in the DC area.
How hot was it?
It was SO hot that my rearview mirror fell down.
 I see that there's a metal plate that glues to the inside of the 
windshield, and then the mirror attaches to this.
What's the best product for this? I haven't had time to go to the
hardware 
store and talk to the good 'ol boys.
THanks!
Greg.

-- 
I'm all about doing monstrously stupid things against
my better judgement.
-Anson
_______________________________________________
Scirocco-l mailing list
Scirocco-l@scirocco.org http://neubayern.net/mailman/listinfo/scirocco-l 
 
 
--------------------------------------------------------

San Francisco  *  San Diego  *  Los Angeles  *  Sacramento  *  Orange County  *  Las Vegas  *  Portland  *  Houston  *  Phoenix  

This email communication may contain CONFIDENTIAL INFORMATION WHICH ALSO MAY BE LEGALLY PRIVILEGED and is intended only for the use of the intended recipients identified above. If you are not the intended recipient of this communication, you are hereby notified that any unauthorized review, use, dissemination, distribution, downloading, or copying of this communication is strictly prohibited. If you are not the intended recipient and have received this communication in error, please immediately notify us by reply email, delete the communication and destroy all copies. GORDON & REES LLP  http://www.gordonrees.com