Suspension Questiion

[scorpio71 at charter.net (Jeff)]

I'll report after I've driven on them a little. Someone does make solid
mounts, but they are aluminum, I think, and would relay ALL vibration and
impact the strut tower negatively me thinks.
I am using stock 16v stuff on my 79, but if I was going to buy aftermarket,
Autotech hollow bars would be my choice. You can probably pick up some
neuspeed bars pretty cheap, though. I ran Neuspeed big sways on my rabbit,
and they are heavy. I am more concerned with weight now than ever
before. ----- Original Message -----
From: "Jason Carr" <carrpolo86@hotmail.com>
To: <scorpio71@charter.net>
Sent: Tuesday, July 26, 2005 10:19 PM
Subject: Re: Suspension Questiion


> Keep me posted. I can't imagine what the problem is with these though. I
set
> the shock to #1 the rocco corners worst than the factory shocks. I set it
to
> 3 and I blow through the bearings. I wish I could find something to just
> bolt the shock to the wheel well. I know it would be a rough ride but I
> think it could be better than what I am going through.
>
> Any suggestions on a front and rear lower sway bar??
> Jason
>