[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Brake light switch
IIRC, if you are crafty you can run the switch in the
old pedal cluster by drilling a hole an mounting the
switch. It takes some patience, but you can do it.
I think the mki's had the brake switch on the master.
--- "John C. Worden" <johncworden@verizon.net> wrote:
> At 09:40 AM 7/21/05, C Boyko wrote:
>
> >Okay, my MkI has toasted the brake switch/wiring to
> it on the master
> >cylinder. I will probably upgrade to the newer
> arrangement if I can figure
> >out where the switch is, I have two parts passats
> to harvest from, but
> >where is the switch? It's somewhere on the pedal
> cluster, but I have no
> >idea what I'm even looking for. I really want to
> drive this car, but it's
> >just not letting me, and I'm past my (unusually
> long) patience with it I'm
> >afraid. 8Vs are easy my ass.
> >
> >Cathy
> >
> On the pedal cluster, near the top and closer to you
> as you sit in it. You
> would
> have to swap the pedal cluster too, as the MkI's
> didn't come set up like
> this. Well
> none that I've seen have.
>
> John
>
>
> --
> No virus found in this outgoing message.
> Checked by AVG Anti-Virus.
> Version: 7.0.323 / Virus Database: 267.9.2/54 -
> Release Date: 7/21/05
>
>
>
> _______________________________________________
> Scirocco-l mailing list
> Scirocco-l@scirocco.org
> http://neubayern.net/mailman/listinfo/scirocco-l
>
____________________________________________________
Start your day with Yahoo! - make it your home page
http://www.yahoo.com/r/hs