[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Hella H4 low beam as high beam?
That is how I have my lights set up: low/high beam lenses (H4) in all four
holes, with the two inner H4 bulbs wired for high beam only.
Since the low beams get used 98% of the time, it's always the low filaments
that go out...consequently, I have a box full of H4's over the last 30 years
with only the 100W high filaments. They are my lifetime stash of high beam
bulbs.
Larry
sandiego16v
----- Original Message -----
From: "Rick Kellner" <rfkellner@snet.net>
To: "'Scirocco list'" <scirocco-l@scirocco.org>
Sent: Thursday, July 14, 2005 4:33 AM
Subject: Hella H4 low beam as high beam?
>I have acquired two sets of Hella low beam kits. The kits contain the
> US style rectangular glass lenses, boot, wire harness. Since the lights
> are both high and low beam can one set be used as the high beams? I
> realize that the wiring will be different; basically the low beam
> conductor will not be used. Next a high beam bulb will be used in place
> of the dual low/high beam bulb.
> So do you think it will work (i.e. project the light) properly?
> _______________________________________________
> Scirocco-l mailing list
> Scirocco-l@scirocco.org
> http://neubayern.net/mailman/listinfo/scirocco-l
>
>
> --
> No virus found in this incoming message.
> Checked by AVG Anti-Virus.
> Version: 7.0.323 / Virus Database: 267.8.11/45 - Release Date: 7/9/2005
>
>