[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[SPAM] Re: [SPAM] 16v Race Header and stock Sway bar

To: "Allyn" <amalventano1@tds.net>
Subject: [SPAM] Re: [SPAM] 16v Race Header and stock Sway bar
From: "C Boyko" <roccit_53@scirocco.cs.uoguelph.ca>
Date: Sun, 9 Jan 2005 08:35:39 -0500 (EST)
Cc: scirocco-l@scirocco.org
Delivered-to: getty@richard2.pil.net
Delivered-to: getty-marc@getty.net
Importance: Normal
In-reply-to: <002a01c4f615$996d26b0$0301a8c0@main>
References: <000001c4f5d3$eac0e070$6901a8c0@kellnerhmypj1x> <002a01c4f615$996d26b0$0301a8c0@main>
Sender: scirocco-l-bounces@scirocco.org
User-agent: SquirrelMail/1.4.4-rc1

the 16v tt race header will not hit the stock sway bar - so long as your
engine mounts are not shot. this exact setup on rieger - has about 1/2"
clearance and never hits.
Al

And even good with good mounts, just the TT DP will rattle on the sway
bar, so I imagine alignment of the engine is REALLY critical with the
header, mmmm, header....
damned E test...


Cathy
1999 TDI New Beetle
1987 2L 16V Scirocco "the silver headache"
1979 1.8L 10:1 8V "Klaus"
"Fear and worry always lead to defeat"


_______________________________________________
Scirocco-l mailing list
Scirocco-l@scirocco.org
http://neubayern.net/mailman/listinfo/scirocco-l

References:
- [SPAM] 16v Race Header and stock Sway bar
  - From: "Rick Kellner" <rfkellner@snet.net>
- Re: [SPAM] 16v Race Header and stock Sway bar
  - From: "Allyn" <amalventano1@tds.net>

Prev by Date: Re: [SPAM] 16v Race Header and stock Sway bar
Next by Date: Re: Sway bar removal
Previous by thread: Re: [SPAM] 16v Race Header and stock Sway bar
Next by thread: [SPAM] RE: [SPAM] 16v Race Header and stock Sway bar
Index(es):
- Date
- Thread