Argh - spun wheel bearing

[jlagnese at massed.net (John S. Lagnese)]

If you need the center portion, that the axle goes through and the wheel
bolts to, I believe that they are the same.
----- Original Message -----
From: "Dan" <dan@angband.org>
To: <scirocco-l@scirocco.org>
Sent: Monday, September 20, 2004 10:35 PM
Subject: Argh - spun wheel bearing


> So I pulled my front right wheel bearing on my '85 8v  today.  The bearing
> siezed and spun on the hub.  There are two self serve junkyards near me,
> but neither have any Sciroccos.  Plenty of A1 Rabbits and Jettas,
> though.  So, what can I grab this part off of?  Is the hub the same
> accross all A1s, or can I only get one from specific years?
>
> Dan
>
> --
> If addiction is judged by how long a dumb animal will sit pressing a lever
> to get a "fix" of something, to its own detriment, then I would conclude
> that netnews is far more addictive than cocaine.
>                 -- Rob Stampfli
>
>
> _______________________________________________
> Scirocco-l mailing list
> Scirocco-l@scirocco.org
> http://neubayern.net/mailman/listinfo/scirocco-l