char-broiled ignition update

[SCIROCCO75 at aol.com (SCIROCCO75@aol.com)]

In a message dated 10/30/04 8:30:06 AM Eastern Daylight Time, 
marc_scirocco@sympatico.ca writes:
Measure the lobes at the highest point minus the base circle and you have
lift.
Thanks, I haven't removed the cam and probably won't measure it, I hate to 
sound lazy but was hoping there was an inscription or something to identify it. 
I did run my finger into the ports however and found the intakes to be larger 
and very smooth, the exhaust still have casting marks though. I think I will 
just remove the degree cam sprocket for use on the 2.0, assuming it will fit. I 
will post photos of the head if anyone is interested, I also have a stock 
head and will accept a reasonable offer. Thanks for the help, Michael