WTB asap - 9A oil pump drive gear

[fahrvegnugen at cox.net (David Utley)]

Have you taken it apart?

The reason I ask is it may be easily fixed.  If the teeth have a bunch of
scratches across the edges, then throw it out.  However, if it appears to be
binding with the bottom (the part that unblolts to reveal the gears), then
just file acorss it until it is good and flat.  If the binding is in the
bush at the top of the pump, then that indeed is not easy to fix.

Did this engine you bought have a headgasket failure, and the water stayed
in the block for X amount of time?

PS--  I have an ABA hydraulic pump (36mmIIRC) with only 40K on it that I
need to sell if you would prefer...

Hope that helps,
  David

-----Original Message-----
From: scirocco-l-bounces@scirocco.org
[mailto:scirocco-l-bounces@scirocco.org]On Behalf Of koabi
Sent: Saturday, October 23, 2004 8:24 PM
To: scirocco-l@scirocco.org
Subject: WTB asap - 9A oil pump drive gear

My current drive gear seems to bind so I'd like to replace it with
another.

Thanks,
koabi


_______________________________________________
Scirocco-l mailing list
Scirocco-l@scirocco.org
http://neubayern.net/mailman/listinfo/scirocco-l