[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Clutch
And while I'm at it, a short while back I mentioned the torn outer CV
boot on the driver's side. Should I do the joint as well? I'm not
sure how long the boot's been busted.
On Wed, 13 Oct 2004 21:55:06 -0400, Mike Smith <smithma7@gmail.com> wrote:
> Looking at Adirondack... I'm assuming I'll need the clutch kit and
> installation kit?
>
>
>
>
> On Wed, 13 Oct 2004 18:50:31 -0700, Larry Fry <rocco16@sbcglobal.net> wrote:
> >
> >
> > > 16v MkII. Clutch is going. IE: when I hit the gas hard while in
> > > gear, the rpms spin up, so I'm assuming it's slipping out of gear
> > > meaning the clutch is going. How long do I have before I'm f'd?
> >
> > It's not slipping out of gear, the clutch is gone...you have zero time.
> >
> > > What's the recommended replacement clutch?
> >
> > If the engine is stock, then the stock clutch is your best value.
> >
> > Larry
> > sandiego16v
> >
> >
>
>
> --
> Mike
> '86 red 16v (Red 5)
>
--
Mike
'86 red 16v (Red 5)
- Follow-Ups:
- Clutch
- From: jdbubb at ix.netcom.com (Dan Bubb)
- References:
- Clutch
- From: smithma7 at gmail.com (Mike Smith)
- Clutch
- From: rocco16 at sbcglobal.net (Larry Fry)
- Clutch
- From: smithma7 at gmail.com (Mike Smith)