Something good from vortex

[roccit_53 at scirocco.cs.uoguelph.ca (C Boyko)]

Nah, not that much. I did mine way back when I first got it, it may have
been the first thing I asked the list about actually. Not hard to do, just
take your time.

Cathy

> ....and they only cost what, $2000.00?
>
>
> David Utley <fahrvegnugen@cox.net> wrote:
> The cable inside the seat has stretched, or the bushes that guide the
> cable through the frame have come loose. The only way I know to fix these
> potential problems is by taking the seat upholstery off the frame. It can
> be done, but you will need some hog rings and ideally some hog ring
> pliers... I recommend using VW hog rings as they are round when crimped
> instead of having sharp edges, which makes for a cleaner fastening...
>
> HTH
>
> David
>>
>> From: Brad Boston
>> Date: 2004/11/21 Sun PM 11:45:09 EST
>> To: scirocco-l@scirocco.org
>> Subject: RE: Something good from vortex
>>
>> Ok, the release handle on the seat fold mechanism in my 88 rocco doesn't
>> do anything anymore. It feels like the release mechanism is only
>> working on one side now. What is the best way to fix it? Take the seat
>> apart? Or can it be done without doing that.
>>
>> Brad