Posted Driver's Side Mount Fab Page

[kirsten at funksoulkitty.org (Kirsten Jensen)]

<< snip >>

>Are you going to post drawings with specs for the passenger side, driver's 
>side, and rear mounts?

Well actually, I was going to fire up Solid Edge and make an attempt at 
doing just that.  I would be working backwards from the finished part, but 
I have an awesome set of digital calipers.....and a nice mic....and other 
measuring utensils of the precision variety....so it would be fairly 
accurate in terms of the dimensional callouts...... (um, not only do I own 
'em ....I am also proficient at using them too...)

Also, I would think that at some point, my years in the machine shops would 
kick in and I would be able to provide a drawing etc. which would actually 
be useful enough to build something from (can't guarantee that something 
would be the part you were hoping for...but I am sure it would be 
something......heh)

All of the relevant info for making them yourself would be there.....and I 
would just use Solid Edge to convert the part file into a drawing....and 
then post everything on my site (part file, iso view of the part, and the 
drawings).

I actually already started working on the one for the passenger side mount.....

The PS mount bracket part file etc. is hanging out with the April engine 
swap page, the rear tranny mount bracket page, the clutch MC page, rear 
disk conversion page....and the life of the party....the drum removal page.....

......and none of those guys seem to be eagerly leaving the rest of the 
group to head towards completion......BUT I will be happy to inform 
everyone when one of 'em does....

** provided Dan is okay with this as well......of course.....

Kirsten