[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Brakes

so do the momentum brackets for 11" brakes work for the wilwood dynalite
calipers.   such as these
<http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&rd=1&item=24789071
56&category=33566>


or would you need to make custom brackets or do they work with the stock
carriers for 10.1 inch applications.

thanks
robert
----- Original Message ----- 
From: "Brian Honnold" <bhonnold@pac-cap.com>
To: <scirocco-l@scirocco.org>
Sent: Tuesday, May 18, 2004 2:12 PM
Subject: RE: Brakes


> When I was shopping for brakes, I researched using a corrado setup and
then
> the Audis.  Both require 11 inch rotors and specific offset wheels to
work.
>
>
> But, to me the main problem with those setups is the weight.  An Audi dual
> piston caliper by itself, no adapter or lines weighs over 7 lbs.  Cheapest
I
> could find a set of those boat anchors locally was $100 used not including
> pads and lines or rotors.
>
> Wilwoods on the other hand weigh in at under 3lbs with pads and lines and
> also work with the stock 16v rotors and you get the benefit of more
pistons.
>
> If your lucky you can find a set for under $200 used.
>
> Brian Honnold
> Only the best parts go in my boxes
>
>
>
> _______________________________________________
> Scirocco-l mailing list
> Scirocco-l@scirocco.org
> http://neubayern.net/mailman/listinfo/scirocco-l