Need to source a 11mm triple square and more explicit 3A

[ats at longcoeur.com (Patrick Bureau)]

But I am dumb, The head is 12mm indeed, duh!

www.germanautoparts.com states on their tools section
"12 point triple-square drive bit - For head bolts and starter bolts on some
models. This is not a Torx bit, it is a 12-point star shaped bit correct for
these bolts.
12 point triple-square bit 10mm size - for starter bolts 9.45  
12 point triple-square bit 12mm size - for head bolts 10.50 "

Ill just shutup now and get more cofee.


---
ATS - Patrick Bureau -  Web site :
http://ats.longcoeur.com]http://ats.longcoeur.com
AIM: texasscirocco - Yahoo: atsgtx - ICQ: 32918816 - MSN: atsgtx@hotmail.com
See what I am selling today on eBay: http://tinyurl.com/22e5b

 

->-----Original Message-----
->From: scirocco-l-bounces@scirocco.org 
->[mailto:scirocco-l-bounces@scirocco.org] On Behalf Of Patrick Bureau
->Sent: Friday, March 26, 2004 7:01 AM
->To: 'T Berk'; stetson@unrealexpectations.ath.cx
->Cc: 'scirocco list'
->Subject: RE: Need to source a 11mm triple square and more explicit 3A
->
->Well because it is an 11mm bolt.
->
->16v PL headbolt : 027103385C -
->Vwparts lists it as 11x144mm headbolts :
->http://www.impexfap.com/partlist.cfm?getpart=5092&PARTNUMBERSE
->ARCH=027103385
->c#part5092
->
->
->8 v JH Headbolt : 049103384B - M11x1,5x96 Etka 
->Sci-85-01-03-05-00 Item # 12
->Vwparts lists it as 11x96mm (all 8v exc 16v) :
->http://www.impexfap.com/partlist.cfm?getpart=4882&PARTNUMBERSE
->ARCH=049103384
->b#part4882
->
->
->---
->ATS - Patrick Bureau -  Web site :
->http://ats.longcoeur.com]http://ats.longcoeur.com
->AIM: texasscirocco - Yahoo: atsgtx - ICQ: 32918816 - MSN: 
->atsgtx@hotmail.com
->See what I am selling today on eBay: http://tinyurl.com/22e5b
->
-> 
->
->->-----Original Message-----
->->From: scirocco-l-bounces@scirocco.org 
->->[mailto:scirocco-l-bounces@scirocco.org] On Behalf Of T Berk
->->Sent: Friday, March 26, 2004 3:00 AM
->->To: stetson@unrealexpectations.ath.cx
->->Cc: scirocco list
->->Subject: Re: Need to source a 11mm triple square and more 
->explicit 3A
->->
->->stetson wrote:
->->
->->> K then....
->->> 
->->> I'm sitting here, polishing off some Linguini Carbonara con 
->->Portabella 
->->> w/ freshly grated Romano and FUMING!!!
->->> 
->->> The nice set of Allen/Torx/polygonal socket that cost me 
->->$35 DOES NOT 
->->> HAVE A 11mm triple square!!!!
->->> 
->->> Farging Bastiges!
->->> 
->->> And most of you know why I need it.
->->> 
->->> Head bolts.
->->> 
->->> Where can I get this ONE socket (preferrably in stock and in 1/2"
->->> drive)?!?!?!?
->->
->->Headbolts ARE 12mm Twelvepoint. Tell me more why you need an 11?
->->
->->"WhatChuTalkinAboutWillis?"
->->
->->TBerk
->->
->->
->->_______________________________________________
->->Scirocco-l mailing list
->->Scirocco-l@scirocco.org
->->http://neubayern.net/mailman/listinfo/scirocco-l
->->
->->
->
->
->
->_______________________________________________
->Scirocco-l mailing list
->Scirocco-l@scirocco.org
->http://neubayern.net/mailman/listinfo/scirocco-l
->
->