[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
help I need the torque specs for the flywheel ;(
Pressure plate bolts are torqued to 22ft-lb plus 1/4 turn.
The flywheel bolts are to be snugged evenly when the clutch disc has been
centred. With the clutch disc removed, they are torqued to 15lb-ft in a
crossed pattern that starts with the right-most bolt of the top group of
three, then the centre bolt of the bottom left group of three, then the
top bolt of the bottom right group of three and so on.
HTH.
Drew
On Tue, 23 Mar 2004, Ryan Ruggles wrote:
> Please can somebody tell me what the what I am supposed to torque the flywheel bolts to? I don't have a manual and I can't get one. I need to put this thing back together today. I don;t want to just guess at the torque spec and have a big problem down the road.
>
> Thanks for the help so far
>
> Ryan
> _______________________________________________
> Scirocco-l mailing list
> Scirocco-l@scirocco.org
> http://neubayern.net/mailman/listinfo/scirocco-l
>
--
============================================
84 Wolfsburg Edition TurboDiesel Scirocco
http://scirocco.cs.uoguelph.ca/gtd
89 Audi 200 Turbo Quattro Avant
99 A3 Jetta TDI
============================================