[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
When Replacing cap n rotor and/or plug wires
- Subject: When Replacing cap n rotor and/or plug wires
- From: tberk at sbcglobal.net (T Berk)
- Date: Thu Mar 18 00:47:27 2004
Replace ONE wire on the cap at a time.
You pull the old cap off with wires attached, look inside for the
orientation tab (it fits in a slot on the Dist), line up the new cap,
then move one wire over to the new cap until they are all over there.
Once done you snap the new (or reused) cap onto the Dist & Fire it Up.
Next time it'll be that much easier.
TBerk