Needed 9.4 vented brake rotors and pads for Rodolfo

[rocco16 at sbcglobal.net (Larry Fry)]

Marc,
  Are you absolutely CERTAIN that you aren't from Tijuana?
:)
Larry


> Your solid rotors are grooved? Machine them yourself.
>
>  - Get both front wheels up in the air.
>  - Remove the wheels, but put the wheel bolts back into the rotors.
>  - While the motor is not running, put gear in first, or second.
>  - Here comes the fun part, start the motor, but DON'T touch the brake
> pedal, or you are in for a big mess.
>  - Grab a grinder, and "machine" both external rotor faces as best as you
> can get them.
>  - Once the rotors look ok, stop the motor. Remember DON'T touch the brake
> pedal.
>  - When the rotors stop turning, remove the wheel bolts, and reverse the
> rotors: face out, now in.
>  - Wheel bolts back on.
>  - Start the motor.
>  - Grind the rotors.
>  - Stop the motor.
>  - New pads in, and rotors back into their normal place.
>  - Bed pads
>
> Remember, this is a somewhat temporary procedure, but I did it several
times
> over my first years of owning A1s, and it will help a bit.
>
> Disclaimer: if you harm yourself during this procedure, please go to a
> clinic.
>
> Cheers.
>
> Marc