How to extract CIS box harness through mk1 rain tray?

[area53 at validpath.com (Jeff Toomasson)]

This is what I'm talking about:

http://validpath.com/images/81s/connector.JPG

Sawzall???   sheeesh...   :)
----- Original Message ----- 
From: "Ron Pieper" <rapieper@yahoo.com>
To: "Brett Van Sprewenburg" <brett@netacc.net>; "Jeff Toomasson"
<area53@validpath.com>
Cc: "The Scirocco List" <scirocco-l@scirocco.org>
Sent: Friday, July 02, 2004 12:52 PM
Subject: Re: How to extract CIS box harness through mk1 rain tray?


> Or...you can just sawzall through the firewall to make the hole nice and
big.
>
> In that particular case, we were trying to save the harness, not the car.
Jeff, does this fit
> your needs??
>
> ;)
>
> Ron
>
> --- Brett Van Sprewenburg <brett@netacc.net> wrote:
> > As Allyn previously pointed out, the unmolested connector does in
> > fact fit through that hole.
> > I would only add that this job can be made _tons_ easier by heating
> > the wiring harness with
> > a heat gun.  Not to the point of melting or anything, just enough to
> > make it flexible and
> > workable.  You won't be as tempted to hack it in half if you do that. :)
>
>
>
>
> __________________________________
> Do you Yahoo!?
> Yahoo! Mail is new and improved - Check it out!
> http://promotions.yahoo.com/new_mail