Oil leak won't go away :(

[carvsdriver at msbx.net (carvsdriver@msbx.net)]

>If it's a leak where the filter bracket meets the block, you likely have a >blown flange seal (is this what you replaced?)  Take the flange off, peel >the seal out, then peel the seal off an oil filter, and use it as the flange 
>seal. HTH!


I think what you are referring to is the O-ring seal that goes between the oil cooler and the oil filter mounting bracket.  The car is leaking where the oil filter mounting bracket mounts to the engine block...

-Doug C.