Disassembling the Speedometer

[ats at longcoeur.com (Patrick Bureau)]

Well my job is done,.. NEXT question please...lol

-----Original Message-----
From: scirocco-l-bounces@scirocco.org
[mailto:scirocco-l-bounces@scirocco.org] On Behalf Of Ryan H
Sent: Wednesday, January 14, 2004 9:02 PM
To: dswalterwi
Cc: scirocco-l@scirocco.org
Subject: Re: Disassembling the Speedometer

Those 6 pins are attached to the hard PCB.  The black connector, however,
comes off them.  Remove it by gently pulling on it while giving it a little
side to side twist.
I think that's what you're stuck on, but try here if you need more help:
http://www.longcoeur.com/scirocco/Index2.html
Click Tech Notes, then look down in the Interior repair section.

> 
> From: "dswalterwi" <dswalterwi@earthlink.net>
> Date: 2004/01/14 Wed PM 09:02:57 EST
> To: <scirocco-l@scirocco.org>
> Subject: Disassembling the Speedometer
> 
> I am following the instructions of Foxx (in a box) and Brett Van
> Sprewenburg web sites.  I am confused as if the flexible circuit board
> can be completely removed from the speedometer cluster.  I got
> everything off except there seems to be six little silver connectors?
> Located near the voltage stabilizer that seem to be holding it to the
> speedometer casing.  I can take the entire tach and speedo out of the
> housing but can't seem to separate the speedometer from the flexible
> circuit board.  Can someone help?
>  
> Don
> _______________________________________________
> Scirocco-l mailing list
> Scirocco-l@scirocco.org
> http://neubayern.net/mailman/listinfo/scirocco-l
> 


_______________________________________________
Scirocco-l mailing list
Scirocco-l@scirocco.org
http://neubayern.net/mailman/listinfo/scirocco-l